USA Clad Wood
4-Panel Sliding Patio Door
Sliding Doors offer many of the same features and options as our in-swing and out-swing doors but in a sliding door configuration. This one features four panels with two in the middle that slide open for wide access.
Product Features
• Sliding Door Panels• Full Glass Door Panel• Tempered Insulated Glass• Solid Panel Insert Options• Adjustable Roller System• Dual Latch Handle Set• No-Warp Door Panel / LVL Lock Side Stile• 4-11/16” Profile Width Stiles and Rails • Standard Jamb Depth = 4-9/16"Series Features
• Extruded Aluminum Exterior• Clear Pine Interior• Integral Nailing Fin• Water Management System• Powder Coated Exterior Finish• Low-E Insulated Glass• Argon Gas Filled Airspace• Duralite™ Glass Spacer System• Black Glazing Channel• Complete Weather Seal ProtectionProduct Operation
Our 4-panel units, also called Quad Sliders, have two fixed panels, one on each end, and two middle panels that slide open.
A dual-latch handle set secures the operating panels when closed while providing an interior and exterior handle to grasp when sliding the panel. The operating panel glides on heavy-duty, stainless steel, ball-bearing loaded, tandem rollers. These rollers are adjustable.
Jamb Depth
The standard jamb depth is 4-9/16”. A jamb depth of 6-9/16" is also available. See Jamb Options for more information.
Product Data Sheet
Download PDF4-Panel Sliding Door Options
Click on the tabs below to view the various options available for this product.
All of our extruded aluminum-clad windows and doors are available in a wide range of exterior powder-coated finish colors to coordinate with the design of your project. Click on the link below to see our color choices.
Exterior Color Options
An extruded aluminum exterior casing and trim system is available on our clad windows and doors to enhance the visual appeal of the windows and doors. Available in a variety of trim and casing profiles, these extrusions add a dimensional accent to the product and the home or building.
Exterior Trim Options
Our 4-panel units, also called Quad Sliders, have two fixed panels, one on each end, and two middle panels that slide open.
Because of their large size and weight, these units are available in a KD (or knock-down) version where the frame comes in a kit to be assembled on-site. See our Assembly and Installation Instructions.
Fully assembled units are available when they are sized within our shipping limitations.
Our clad-wood products feature clear pine interiors that are ideally suited for staining or painting. Choose to have your windows and doors delivered without any interior finish so that you can stain or paint them yourself or have them primed or painted at the factory with your choice of one of our standard interior finish colors.
Dual Latch Handle Set
Contemporary & Signature Styles
Our Dual-Latch Handle Sets are available in two styles: Contemporary and Signature.
For the active panel, the Interior Handle has a latch lever that manually secures the door panel in its closed position. The Exterior Handle is available in two versions. One is a plain handle without a lock. This version cannot be unlocked or unlatched from the exterior. The other version has a keyed cylinder lock that provides access from the outside using a key.
The secondary operating panel (or passive panel) also has a handle set. This handle set has no latching or locking function. Latching is provided by the hardware on the active panel. Therefore, the interior and exterior handles on the secondary panel only provide a handhold and are known as passive handles. This is also sometimes referred to as a dummy handle.
See the Handle Set options on the Hardware Options page.
Sliding Door Jambs are 4-9/16” as standard. A 6-9/16” Jamb is also available.
Jamb Options
The sill is pultruded fiberglass with a stainless steel guide track.
Insulated Glass is the heart of the energy efficiency of windows and patio doors. Sun manufactures our insulated glass units to ensure the quality and performance of our Insulated Glass. Learn more on our Glass Options page.
All doors come with Tempered glass as standard.
Quick Links to our Glass Types
Glass stops are available in standard and contemporary profiles for most products.
Glass Stops
Several grille systems are available to add lite division to the glass area.
Grille Types
Grille systems add divided lite designs to windows and doors. They are available in a variety of patterns that can be customized to meet your design needs.
Grille Patterns
Sun Clad Wood Doors, including swing doors, sliding doors, and bi-fold doors, all use a common door panel. These panels are typically full-view glass panels. However, there are several options for configuring the panels to reflect unique styles and designs.
Panel Options
4-11/16” Profile Width Stiles and Rails
All of our standard door panels feature equal stile and rail face dimensions. Panel rails and stiles are 4-11/16”.
A tall bottom rail option is available for applications requiring a tall profile.
Optional solid insert panels are available in many configurations to achieve almost any balance between glass view and non-viewing areas.